11-12-2019, 02:37 AM
Product Introduction
20L PET bottle making machine semi automatic MS-20 has been improved based on traditional semi model. It is widely used to produce PET water bottles ranging from 6L to 20L (2 to 5 gallon). We can provide performs and various blow molds for 3gallon and 5gallon bottles to meet customer's requirements
Product Parameter
Models MS-20L
Theoretical Output60-240 bottles per hour
Mold cavities1
Opening Stroke320 mm
Mold Max. Width X Height480 X 600 mm
Bottles
bottle capacity20L
Neck size25-120 mm
Power
Heater Qty.36 PCS
Heating Power36 KW
Rated General Power37 KW
VoltageCustomized
Air Resource
Low pressure8-10bar
High pressure2 30bar
Dimension & Weight
Blower2500*950*2050 (mm)
Oven2300*700*2010 (mm)
Weight2500 KGS
Others
ConditionBrand New
Product Feature
The complete production line for making 5 Gallon PET bottle our factory supply includes:
1.Main blower 1 unit
2.Preform Infrared Heating Oven 1 set
3.Chilling type air dryer (with built in rear/front filter) 1 set
4.Low pressure air compressor 12bars /0.8M3 1 set
5.High pressure air compressor 30 bars/0.7M3 1 set
6.Blow mould for 5 Gallon bottle 1 cavity 1 unit
7.Water Chiller 1 set
Product Application
FAQ
Q1: How to tell us your enquiry?
A1: You can contact us by email, phone call, fax, Instant Messenger (Trademanager, WhatApp) and let us know your requirement.
Q2: Is there complete machine include bottle mould and air compresor?
A2: Yes, we offer complete line including air compressor, air dryer and chiller. We will help you to get suitable model for your requirements.
Industry Tips (Trouble shooting during PET Blow Molding and Solution)
HOT SIDES 鈥?(TOO WARM)
DESCRIPTION
Inconsistent haze around the bottle, at its worst almost surrounding the
bottle. Often a vertical line wider at the bottom than at the top may be
evident. Evidence of overheating is present; severe dimples and pearlescence may be evident below the haze and will be worse on off-centre base.
CAUSE
1.Inconsistent preform rotation through the oven.
2.Insufficient surface cooling of the preform.
3.Oven shields touching the preform.
4.Air diffuser on blow nozzle may be damaged.
SOLUTION
1.Check the preform for a drag mark. Ensure oven shields are not touching the preform. Check collet, spindle or mandrel rotation.
2.Check oven ventilation and increase airflow if necessary.
3.Check oven shield set up.
4.Check air diffuser for damage. Semi Automatic PET Bottle Making Machine suppliers
website:http://www.bottleblow.com/pet-bottle-making-machine/semi-automatic-pet-bottle-making-machine/
20L PET bottle making machine semi automatic MS-20 has been improved based on traditional semi model. It is widely used to produce PET water bottles ranging from 6L to 20L (2 to 5 gallon). We can provide performs and various blow molds for 3gallon and 5gallon bottles to meet customer's requirements
Product Parameter
Models MS-20L
Theoretical Output60-240 bottles per hour
Mold cavities1
Opening Stroke320 mm
Mold Max. Width X Height480 X 600 mm
Bottles
bottle capacity20L
Neck size25-120 mm
Power
Heater Qty.36 PCS
Heating Power36 KW
Rated General Power37 KW
VoltageCustomized
Air Resource
Low pressure8-10bar
High pressure2 30bar
Dimension & Weight
Blower2500*950*2050 (mm)
Oven2300*700*2010 (mm)
Weight2500 KGS
Others
ConditionBrand New
Product Feature
The complete production line for making 5 Gallon PET bottle our factory supply includes:
1.Main blower 1 unit
2.Preform Infrared Heating Oven 1 set
3.Chilling type air dryer (with built in rear/front filter) 1 set
4.Low pressure air compressor 12bars /0.8M3 1 set
5.High pressure air compressor 30 bars/0.7M3 1 set
6.Blow mould for 5 Gallon bottle 1 cavity 1 unit
7.Water Chiller 1 set
Product Application
FAQ
Q1: How to tell us your enquiry?
A1: You can contact us by email, phone call, fax, Instant Messenger (Trademanager, WhatApp) and let us know your requirement.
Q2: Is there complete machine include bottle mould and air compresor?
A2: Yes, we offer complete line including air compressor, air dryer and chiller. We will help you to get suitable model for your requirements.
Industry Tips (Trouble shooting during PET Blow Molding and Solution)
HOT SIDES 鈥?(TOO WARM)
DESCRIPTION
Inconsistent haze around the bottle, at its worst almost surrounding the
bottle. Often a vertical line wider at the bottom than at the top may be
evident. Evidence of overheating is present; severe dimples and pearlescence may be evident below the haze and will be worse on off-centre base.
CAUSE
1.Inconsistent preform rotation through the oven.
2.Insufficient surface cooling of the preform.
3.Oven shields touching the preform.
4.Air diffuser on blow nozzle may be damaged.
SOLUTION
1.Check the preform for a drag mark. Ensure oven shields are not touching the preform. Check collet, spindle or mandrel rotation.
2.Check oven ventilation and increase airflow if necessary.
3.Check oven shield set up.
4.Check air diffuser for damage. Semi Automatic PET Bottle Making Machine suppliers
website:http://www.bottleblow.com/pet-bottle-making-machine/semi-automatic-pet-bottle-making-machine/